There are two ways that a homeowner can deal with sewage and the one they use often depends on where the home is located. The typical method for disposing of waste is the municipal sewer system, but for homes where this isn’t an option, the house must be connected to a septic system. The septic system is basically a tiny sewage treatment plant. It works by collecting the waste in a large tank where enzymes and bacteria consume any proteins available. This action leaves a dense sludge that collects on the bottom of the tank. After this sludge reaches a certain level, it is necessary to contact an expert in residential septic tank pump services in Hudson WI to clean out the waste.
The septic tank collects the waste and this is where the processing begins. The tank needs to be large enough that any solids will settle to the bottom and the effluent can rise. Once the liquid waste reaches a certain level, it begins to leach out of the tank and into the field lines. The field lines or leach lines are a series of perforated pipes that slowly return the waste water back into the soil. This is known as percolation and the whole point is to let the soil filter the liquid before it is returned to the local water table.
Every septic system will be a little different in the way it functions and how often it will need to be cleaned. One reason for this will be the amount of use that the tank will get. A large family can put quite a load on a smaller septic system and this may force the homeowner to call for Residential Septic Tank Pump Services in Hudson WI more often. The typical cycle for pumping is approximately every two to three years. Waiting too long can present a problem because excess waste can clog the sewer inlet or plug up the drainage holes in leach lines. These can be difficult issues to deal with because they usually require the system to be thoroughly cleaned. To learn more about septic services, contact us.
